[Thu Oct 17 21:09:39 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh reset (start)
[Thu Oct 17 21:09:40 2024] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[Thu Oct 17 21:09:40 2024] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[Thu Oct 17 21:09:40 2024] pci 0000:00:1e.0: PCI bridge to [bus 11]
[Thu Oct 17 21:09:41 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh reset (done)
[Thu Oct 17 21:09:43 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh status (start)
[Thu Oct 17 21:09:44 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh status (done)
[Thu Oct 17 21:09:44 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh  (start)
[Thu Oct 17 21:09:45 2024] ioatdma 0000:00:04.7: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] igb 0000:04:00.0: DCA disabled
[Thu Oct 17 21:09:45 2024] igb 0000:04:00.1: DCA disabled
[Thu Oct 17 21:09:45 2024] igb 0000:04:00.2: DCA disabled
[Thu Oct 17 21:09:45 2024] igb 0000:04:00.3: DCA disabled
[Thu Oct 17 21:09:45 2024] ioatdma 0000:00:04.6: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:00:04.5: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:00:04.4: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:00:04.3: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:00:04.2: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:00:04.1: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:00:04.0: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:80:04.7: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:80:04.6: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:80:04.5: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:80:04.4: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:80:04.3: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:80:04.2: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:80:04.1: Removing dma and dca services
[Thu Oct 17 21:09:45 2024] ioatdma 0000:80:04.0: Removing dma and dca services
[Thu Oct 17 21:09:47 2024] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[Thu Oct 17 21:09:47 2024] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[Thu Oct 17 21:09:47 2024] pci 0000:00:1e.0: PCI bridge to [bus 11]
[Thu Oct 17 21:09:47 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh  (done)
[Thu Oct 17 21:09:48 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh reset (start)
[Thu Oct 17 21:09:49 2024] igb 0000:04:00.0: DCA enabled
[Thu Oct 17 21:09:49 2024] igb 0000:04:00.1: DCA enabled
[Thu Oct 17 21:09:49 2024] igb 0000:04:00.2: DCA enabled
[Thu Oct 17 21:09:49 2024] igb 0000:04:00.3: DCA enabled
[Thu Oct 17 21:09:50 2024] nvme nvme0: pci function 0000:85:00.0
[Thu Oct 17 21:09:50 2024] nvme nvme0: 48/0/0 default/read/poll queues
[Thu Oct 17 21:09:50 2024] nvme nvme0: Ignoring bogus Namespace Identifiers
[Thu Oct 17 21:09:50 2024] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[Thu Oct 17 21:09:50 2024] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[Thu Oct 17 21:09:50 2024] pci 0000:00:1e.0: PCI bridge to [bus 11]
[Thu Oct 17 21:09:50 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh reset (done)
[Thu Oct 17 21:09:50 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh  (start)
[Thu Oct 17 21:09:52 2024] ioatdma 0000:00:04.7: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] igb 0000:04:00.0: DCA disabled
[Thu Oct 17 21:09:52 2024] igb 0000:04:00.1: DCA disabled
[Thu Oct 17 21:09:52 2024] igb 0000:04:00.2: DCA disabled
[Thu Oct 17 21:09:52 2024] igb 0000:04:00.3: DCA disabled
[Thu Oct 17 21:09:52 2024] ioatdma 0000:00:04.6: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:00:04.5: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:00:04.4: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:00:04.3: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:00:04.2: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:00:04.1: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:00:04.0: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:80:04.7: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:80:04.6: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:80:04.5: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:80:04.4: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:80:04.3: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:80:04.2: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:80:04.1: Removing dma and dca services
[Thu Oct 17 21:09:52 2024] ioatdma 0000:80:04.0: Removing dma and dca services
[Thu Oct 17 21:09:53 2024] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[Thu Oct 17 21:09:53 2024] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[Thu Oct 17 21:09:53 2024] pci 0000:00:1e.0: PCI bridge to [bus 11]
[Thu Oct 17 21:09:53 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh  (done)
[Thu Oct 17 21:11:05 2024] nbd0: detected capacity change from 0 to 131072
[Thu Oct 17 21:11:05 2024] block nbd0: Other side returned error (5)
[Thu Oct 17 21:11:05 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Thu Oct 17 21:11:05 2024] Buffer I/O error on dev nbd0, logical block 0, async page read
[Thu Oct 17 21:11:06 2024] nbd1: detected capacity change from 0 to 131072
[Thu Oct 17 21:11:06 2024] block nbd0: NBD_DISCONNECT
[Thu Oct 17 21:11:06 2024] block nbd0: Disconnected due to user request.
[Thu Oct 17 21:11:06 2024] block nbd1: NBD_DISCONNECT
[Thu Oct 17 21:11:07 2024] block nbd1: Disconnected due to user request.
[Thu Oct 17 21:11:11 2024] nbd0: detected capacity change from 0 to 131072
[Thu Oct 17 21:11:12 2024] block nbd0: Other side returned error (5)
[Thu Oct 17 21:11:12 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Thu Oct 17 21:11:12 2024] Buffer I/O error on dev nbd0, logical block 0, async page read
[Thu Oct 17 21:11:12 2024] nbd1: detected capacity change from 0 to 131072
[Thu Oct 17 21:11:12 2024] block nbd1: Other side returned error (5)
[Thu Oct 17 21:11:12 2024] I/O error, dev nbd1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Thu Oct 17 21:11:12 2024] Buffer I/O error on dev nbd1, logical block 0, async page read
[Thu Oct 17 21:11:13 2024] block nbd0: NBD_DISCONNECT
[Thu Oct 17 21:11:13 2024] block nbd0: Disconnected due to user request.
[Thu Oct 17 21:11:13 2024] block nbd1: NBD_DISCONNECT
[Thu Oct 17 21:11:13 2024] block nbd1: Disconnected due to user request.
[Thu Oct 17 21:11:18 2024] nbd0: detected capacity change from 0 to 131072
[Thu Oct 17 21:11:18 2024] block nbd0: Other side returned error (5)
[Thu Oct 17 21:11:18 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Thu Oct 17 21:11:18 2024] Buffer I/O error on dev nbd0, logical block 0, async page read
[Thu Oct 17 21:11:18 2024] nbd1: detected capacity change from 0 to 131072
[Thu Oct 17 21:11:18 2024] block nbd1: Other side returned error (5)
[Thu Oct 17 21:11:18 2024] I/O error, dev nbd1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Thu Oct 17 21:11:18 2024] Buffer I/O error on dev nbd1, logical block 0, async page read
[Thu Oct 17 21:11:19 2024] block nbd0: NBD_DISCONNECT
[Thu Oct 17 21:11:19 2024] block nbd0: Disconnected due to user request.
[Thu Oct 17 21:11:19 2024] block nbd1: NBD_DISCONNECT
[Thu Oct 17 21:11:19 2024] block nbd1: Disconnected due to user request.
[Thu Oct 17 21:12:18 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh  (start)
[Thu Oct 17 21:12:19 2024] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[Thu Oct 17 21:12:19 2024] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[Thu Oct 17 21:12:19 2024] pci 0000:00:1e.0: PCI bridge to [bus 11]
[Thu Oct 17 21:12:19 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh  (done)
[Thu Oct 17 21:18:42 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh reset (start)
[Thu Oct 17 21:18:43 2024] igb 0000:04:00.0: DCA enabled
[Thu Oct 17 21:18:43 2024] igb 0000:04:00.1: DCA enabled
[Thu Oct 17 21:18:43 2024] igb 0000:04:00.2: DCA enabled
[Thu Oct 17 21:18:43 2024] igb 0000:04:00.3: DCA enabled
[Thu Oct 17 21:18:44 2024] nvme nvme0: pci function 0000:85:00.0
[Thu Oct 17 21:18:44 2024] nvme nvme0: 48/0/0 default/read/poll queues
[Thu Oct 17 21:18:44 2024] nvme nvme0: Ignoring bogus Namespace Identifiers
[Thu Oct 17 21:18:44 2024] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[Thu Oct 17 21:18:44 2024] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[Thu Oct 17 21:18:44 2024] pci 0000:00:1e.0: PCI bridge to [bus 11]
[Thu Oct 17 21:18:44 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh reset (done)
[Thu Oct 17 21:22:27 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh reset (start)
[Thu Oct 17 21:22:28 2024] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[Thu Oct 17 21:22:28 2024] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[Thu Oct 17 21:22:28 2024] pci 0000:00:1e.0: PCI bridge to [bus 11]
[Thu Oct 17 21:22:28 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh reset (done)
[Thu Oct 17 21:22:28 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh cleanup (start)
[Thu Oct 17 21:22:30 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh cleanup (done)
[Thu Oct 17 21:57:44 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh status (start)
[Thu Oct 17 21:57:46 2024] spdk: /var/jenkins/workspace/vfio-user-phy-autotest/spdk/scripts/setup.sh status (done)