00:22:45.010  ========== Backtrace start: ==========
00:22:45.010  
00:22:45.010  in /home/vagrant/spdk_repo/spdk/test/nvmf/host/auth.sh:128 -> main(["--transport=tcp"])
00:22:45.010       ...
00:22:45.010     123 	NOT rpc_cmd bdev_nvme_attach_controller -b nvme0 -t "$TEST_TRANSPORT" -f ipv4 \
00:22:45.010     124 		-a "$NVMF_FIRST_INITIATOR_IP" -s "$NVMF_PORT" -q "$hostnqn" -n "$subnqn" \
00:22:45.010     125 		--dhchap-key "key1" --dhchap-ctrlr-key "ckey2"
00:22:45.010     126 	
00:22:45.010     127 	# Check reauthentication
00:22:45.010  => 128 	rpc_cmd bdev_nvme_attach_controller -b nvme0 -t "$TEST_TRANSPORT" -f ipv4 \
00:22:45.010     129 		-a "$(get_main_ns_ip)" -s "$NVMF_PORT" -q "$hostnqn" -n "$subnqn" \
00:22:45.010     130 		--dhchap-key "key1" --dhchap-ctrlr-key "ckey1" --ctrlr-loss-timeout-sec 1 \
00:22:45.010     131 		--reconnect-delay-sec 1
00:22:45.010     132 	nvmet_auth_set_key "sha256" "ffdhe2048" 2
00:22:45.010     133 	rpc_cmd bdev_nvme_set_keys "nvme0" --dhchap-key "key2" --dhchap-ctrlr-key "ckey2"
00:22:45.010       ...
00:22:45.010  
00:22:45.010  ========== Backtrace end ==========
00:22:45.010  ========== Backtrace start: ==========
00:22:45.010  
00:22:45.010  in /home/vagrant/spdk_repo/spdk/test/common/autotest_common.sh:589 -> rpc_cmd(["bdev_nvme_attach_controller"],["-b"],["nvme0"],["-t"],["tcp"],["-f"],["ipv4"],["-a"],[""],["-s"],["4420"],["-q"],["nqn.2024-02.io.spdk:host0"],["-n"],["nqn.2024-02.io.spdk:cnode0"],["--dhchap-key"],["key1"],["--dhchap-ctrlr-key"],["ckey1"],["--ctrlr-loss-timeout-sec"],["1"],["--reconnect-delay-sec"],["1"])
00:22:45.010       ...
00:22:45.010     584 			echo "$rsp"
00:22:45.010     585 		done
00:22:45.010     586 	
00:22:45.010     587 		rc=${!status[*]}
00:22:45.010     588 		xtrace_restore
00:22:45.010  => 589 		[[ $rc == 0 ]]
00:22:45.010     590 	}
00:22:45.010     591 	
00:22:45.010     592 	function rpc_cmd_simple_data_json() {
00:22:45.010     593 	
00:22:45.010     594 		local elems="$1[@]" elem
00:22:45.010       ...
00:22:45.011  in /home/vagrant/spdk_repo/spdk/test/nvmf/host/auth.sh:128 -> main(["--transport=tcp"])
00:22:45.011       ...
00:22:45.011     123 	NOT rpc_cmd bdev_nvme_attach_controller -b nvme0 -t "$TEST_TRANSPORT" -f ipv4 \
00:22:45.011     124 		-a "$NVMF_FIRST_INITIATOR_IP" -s "$NVMF_PORT" -q "$hostnqn" -n "$subnqn" \
00:22:45.011     125 		--dhchap-key "key1" --dhchap-ctrlr-key "ckey2"
00:22:45.011     126 	
00:22:45.011     127 	# Check reauthentication
00:22:45.011  => 128 	rpc_cmd bdev_nvme_attach_controller -b nvme0 -t "$TEST_TRANSPORT" -f ipv4 \
00:22:45.011     129 		-a "$(get_main_ns_ip)" -s "$NVMF_PORT" -q "$hostnqn" -n "$subnqn" \
00:22:45.011     130 		--dhchap-key "key1" --dhchap-ctrlr-key "ckey1" --ctrlr-loss-timeout-sec 1 \
00:22:45.011     131 		--reconnect-delay-sec 1
00:22:45.011     132 	nvmet_auth_set_key "sha256" "ffdhe2048" 2
00:22:45.011     133 	rpc_cmd bdev_nvme_set_keys "nvme0" --dhchap-key "key2" --dhchap-ctrlr-key "ckey2"
00:22:45.011       ...
00:22:45.011  
00:22:45.011  ========== Backtrace end ==========
00:22:47.108  ========== Backtrace start: ==========
00:22:47.108  
00:22:47.108  in /home/vagrant/spdk_repo/spdk/test/common/autotest_common.sh:1125 -> run_test(["nvmf_auth_host"],["/home/vagrant/spdk_repo/spdk/test/nvmf/host/auth.sh"],["--transport=tcp"])
00:22:47.108       ...
00:22:47.108     1120		timing_enter $test_name
00:22:47.108     1121		echo "************************************"
00:22:47.108     1122		echo "START TEST $test_name"
00:22:47.108     1123		echo "************************************"
00:22:47.108     1124		xtrace_restore
00:22:47.108     1125		time "$@"
00:22:47.108     1126		xtrace_disable
00:22:47.108     1127		echo "************************************"
00:22:47.108     1128		echo "END TEST $test_name"
00:22:47.108     1129		echo "************************************"
00:22:47.108     1130		timing_exit $test_name
00:22:47.108       ...
00:22:47.108  in /home/vagrant/spdk_repo/spdk/test/nvmf/nvmf_host.sh:27 -> main(["--transport=tcp"])
00:22:47.108       ...
00:22:47.108     22  	run_test "nvmf_fio_host" $rootdir/test/nvmf/host/fio.sh "${TEST_ARGS[@]}"
00:22:47.108     23  	run_test "nvmf_failover" $rootdir/test/nvmf/host/failover.sh "${TEST_ARGS[@]}"
00:22:47.108     24  	run_test "nvmf_host_multipath_status" $rootdir/test/nvmf/host/multipath_status.sh "${TEST_ARGS[@]}"
00:22:47.108     25  	run_test "nvmf_discovery_remove_ifc" $rootdir/test/nvmf/host/discovery_remove_ifc.sh "${TEST_ARGS[@]}"
00:22:47.108     26  	run_test "nvmf_identify_kernel_target" "$rootdir/test/nvmf/host/identify_kernel_nvmf.sh" "${TEST_ARGS[@]}"
00:22:47.108  => 27  	run_test "nvmf_auth_host" "$rootdir/test/nvmf/host/auth.sh" "${TEST_ARGS[@]}"
00:22:47.108     28  	run_test "nvmf_bdevperf" "$rootdir/test/nvmf/host/bdevperf.sh" "${TEST_ARGS[@]}"
00:22:47.108     29  	run_test "nvmf_target_disconnect" "$rootdir/test/nvmf/host/target_disconnect.sh" "${TEST_ARGS[@]}"
00:22:47.108     30  	
00:22:47.108     31  	if [[ "$SPDK_TEST_NVMF_TRANSPORT" == "tcp" ]]; then
00:22:47.108     32  		run_test "nvmf_digest" "$rootdir/test/nvmf/host/digest.sh" "${TEST_ARGS[@]}"
00:22:47.108       ...
00:22:47.108  
00:22:47.108  ========== Backtrace end ==========
00:22:47.108  ========== Backtrace start: ==========
00:22:47.108  
00:22:47.108  in /home/vagrant/spdk_repo/spdk/test/common/autotest_common.sh:1125 -> run_test(["nvmf_host"],["/home/vagrant/spdk_repo/spdk/test/nvmf/nvmf_host.sh"],["--transport=tcp"])
00:22:47.108       ...
00:22:47.108     1120		timing_enter $test_name
00:22:47.108     1121		echo "************************************"
00:22:47.108     1122		echo "START TEST $test_name"
00:22:47.108     1123		echo "************************************"
00:22:47.108     1124		xtrace_restore
00:22:47.108     1125		time "$@"
00:22:47.108     1126		xtrace_disable
00:22:47.108     1127		echo "************************************"
00:22:47.108     1128		echo "END TEST $test_name"
00:22:47.108     1129		echo "************************************"
00:22:47.108     1130		timing_exit $test_name
00:22:47.108       ...
00:22:47.108  in /home/vagrant/spdk_repo/spdk/test/nvmf/nvmf.sh:12 -> main(["--transport=tcp"])
00:22:47.108       ...
00:22:47.108     7   	rootdir=$(readlink -f $testdir/../..)
00:22:47.108     8   	source $rootdir/test/common/autotest_common.sh
00:22:47.108     9   	
00:22:47.108     10  	run_test "nvmf_target_core" $rootdir/test/nvmf/nvmf_target_core.sh --transport=$SPDK_TEST_NVMF_TRANSPORT
00:22:47.108     11  	run_test "nvmf_target_extra" $rootdir/test/nvmf/nvmf_target_extra.sh --transport=$SPDK_TEST_NVMF_TRANSPORT
00:22:47.108  => 12  	run_test "nvmf_host" $rootdir/test/nvmf/nvmf_host.sh --transport=$SPDK_TEST_NVMF_TRANSPORT
00:22:47.108     13  	
00:22:47.108     14  	# Interrupt mode for now is supported only on the target, with the TCP transport and posix or ssl socket implementations.
00:22:47.108     15  	if [[ "$SPDK_TEST_NVMF_TRANSPORT" = "tcp" && $SPDK_TEST_URING -eq 0 ]]; then
00:22:47.108     16  		run_test "nvmf_target_core_interrupt_mode" $rootdir/test/nvmf/nvmf_target_core.sh --transport=$SPDK_TEST_NVMF_TRANSPORT --interrupt-mode
00:22:47.108     17  		run_test "nvmf_interrupt" $rootdir/test/nvmf/target/interrupt.sh --transport=$SPDK_TEST_NVMF_TRANSPORT --interrupt-mode
00:22:47.108       ...
00:22:47.108  
00:22:47.108  ========== Backtrace end ==========
00:22:47.109  ========== Backtrace start: ==========
00:22:47.109  
00:22:47.109  in /home/vagrant/spdk_repo/spdk/test/common/autotest_common.sh:1125 -> run_test(["nvmf_tcp"],["/home/vagrant/spdk_repo/spdk/test/nvmf/nvmf.sh"],["--transport=tcp"])
00:22:47.109       ...
00:22:47.109     1120		timing_enter $test_name
00:22:47.109     1121		echo "************************************"
00:22:47.109     1122		echo "START TEST $test_name"
00:22:47.109     1123		echo "************************************"
00:22:47.109     1124		xtrace_restore
00:22:47.109     1125		time "$@"
00:22:47.109     1126		xtrace_disable
00:22:47.109     1127		echo "************************************"
00:22:47.109     1128		echo "END TEST $test_name"
00:22:47.109     1129		echo "************************************"
00:22:47.109     1130		timing_exit $test_name
00:22:47.109       ...
00:22:47.109  in /home/vagrant/spdk_repo/spdk/autotest.sh:280 -> main(["/home/vagrant/spdk_repo/autorun-spdk.conf"])
00:22:47.109       ...
00:22:47.109     275 			# list of all tests can properly differentiate them. Please do not merge them into one line.
00:22:47.109     276 			if [ "$SPDK_TEST_NVMF_TRANSPORT" = "rdma" ]; then
00:22:47.109     277 				run_test "nvmf_rdma" $rootdir/test/nvmf/nvmf.sh --transport=$SPDK_TEST_NVMF_TRANSPORT
00:22:47.109     278 				run_test "spdkcli_nvmf_rdma" $rootdir/test/spdkcli/nvmf.sh --transport=$SPDK_TEST_NVMF_TRANSPORT
00:22:47.109     279 			elif [ "$SPDK_TEST_NVMF_TRANSPORT" = "tcp" ]; then
00:22:47.109  => 280 				run_test "nvmf_tcp" $rootdir/test/nvmf/nvmf.sh --transport=$SPDK_TEST_NVMF_TRANSPORT
00:22:47.109     281 				if [[ $SPDK_TEST_URING -eq 0 ]]; then
00:22:47.109     282 					run_test "spdkcli_nvmf_tcp" $rootdir/test/spdkcli/nvmf.sh --transport=$SPDK_TEST_NVMF_TRANSPORT
00:22:47.109     283 					run_test "nvmf_identify_passthru" $rootdir/test/nvmf/target/identify_passthru.sh --transport=$SPDK_TEST_NVMF_TRANSPORT
00:22:47.109     284 				fi
00:22:47.109     285 				run_test "nvmf_dif" $rootdir/test/nvmf/target/dif.sh
00:22:47.109       ...
00:22:47.109  
00:22:47.109  ========== Backtrace end ==========