[Thu Nov 7 12:56:47 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:56:47 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:56:48 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:56:48 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:56:49 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:56:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:56:54 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:56:55 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:57:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:57:01 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:57:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:57:08 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:57:08 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:57:08 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:57:08 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:57:09 2024] ata1: SATA link down (SStatus 0 SControl 3D0) [Thu Nov 7 12:57:10 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:57:15 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3D0) [Thu Nov 7 12:57:15 2024] ata1.00: disable device [Thu Nov 7 12:57:21 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:22 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:22 2024] ata1: limiting SATA link speed to 1.5 Gbps [Thu Nov 7 12:57:22 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:57:22 2024] ata1: limiting SATA link speed to 1.5 Gbps [Thu Nov 7 12:57:23 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:57:23 2024] ata1: limiting SATA link speed to 1.5 Gbps [Thu Nov 7 12:57:24 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:57:24 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133 [Thu Nov 7 12:57:24 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [Thu Nov 7 12:57:24 2024] ata1.00: configured for UDMA/133 [Thu Nov 7 12:57:24 2024] ata1.00: detaching (SCSI 0:0:0:0) [Thu Nov 7 12:57:24 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache [Thu Nov 7 12:57:24 2024] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5 [Thu Nov 7 12:57:24 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0 [Thu Nov 7 12:57:24 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [Thu Nov 7 12:57:24 2024] sd 0:0:0:0: [sda] Write Protect is off [Thu Nov 7 12:57:24 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [Thu Nov 7 12:57:24 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [Thu Nov 7 12:57:24 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [Thu Nov 7 12:57:24 2024] sda: sda1 sda2 sda3 [Thu Nov 7 12:57:24 2024] sd 0:0:0:0: [sda] Attached SCSI disk [Thu Nov 7 12:57:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:57:25 2024] ata1.00: configured for UDMA/133 [Thu Nov 7 12:57:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:57:26 2024] ata1.00: configured for UDMA/133 [Thu Nov 7 12:57:27 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:57:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:57:38 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:57:38 2024] ata1.00: disable device [Thu Nov 7 12:57:43 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:44 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:44 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133 [Thu Nov 7 12:57:44 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [Thu Nov 7 12:57:44 2024] ata1.00: configured for UDMA/133 [Thu Nov 7 12:57:44 2024] ata1.00: detaching (SCSI 0:0:0:0) [Thu Nov 7 12:57:44 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache [Thu Nov 7 12:57:44 2024] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5 [Thu Nov 7 12:57:44 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [Thu Nov 7 12:57:44 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0 [Thu Nov 7 12:57:44 2024] sd 0:0:0:0: [sda] Write Protect is off [Thu Nov 7 12:57:44 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [Thu Nov 7 12:57:45 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:51 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:51 2024] ata1.00: configured for UDMA/133 [Thu Nov 7 12:57:51 2024] ata1.00: limiting speed to UDMA/100:PIO4 [Thu Nov 7 12:57:52 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:52 2024] ata1.00: configured for UDMA/100 [Thu Nov 7 12:57:52 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [Thu Nov 7 12:57:52 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [Thu Nov 7 12:57:52 2024] sda: sda1 sda2 sda3 [Thu Nov 7 12:57:52 2024] sd 0:0:0:0: [sda] Attached SCSI disk [Thu Nov 7 12:57:53 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:59 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:57:59 2024] ata1.00: configured for UDMA/100 [Thu Nov 7 12:57:59 2024] ata1.00: limiting speed to UDMA/33:PIO4 [Thu Nov 7 12:58:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:05 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:05 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:58:06 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:06 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:58:07 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:13 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:18 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:18 2024] ata1.00: disable device [Thu Nov 7 12:58:24 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:24 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133 [Thu Nov 7 12:58:24 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [Thu Nov 7 12:58:24 2024] ata1.00: configured for UDMA/133 [Thu Nov 7 12:58:24 2024] ata1.00: detaching (SCSI 0:0:0:0) [Thu Nov 7 12:58:24 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache [Thu Nov 7 12:58:24 2024] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5 [Thu Nov 7 12:58:24 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [Thu Nov 7 12:58:24 2024] sd 0:0:0:0: [sda] Write Protect is off [Thu Nov 7 12:58:24 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [Thu Nov 7 12:58:24 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [Thu Nov 7 12:58:24 2024] ata1.00: limiting speed to UDMA/100:PIO4 [Thu Nov 7 12:58:24 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0 [Thu Nov 7 12:58:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:25 2024] ata1.00: configured for UDMA/100 [Thu Nov 7 12:58:25 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [Thu Nov 7 12:58:25 2024] sda: sda1 sda2 sda3 [Thu Nov 7 12:58:25 2024] sd 0:0:0:0: [sda] Attached SCSI disk [Thu Nov 7 12:58:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:26 2024] ata1.00: configured for UDMA/100 [Thu Nov 7 12:58:26 2024] ata1.00: limiting speed to UDMA/33:PIO4 [Thu Nov 7 12:58:27 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:27 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:58:28 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:28 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:58:29 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:29 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:58:29 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:29 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:58:34 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:40 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:40 2024] ata1.00: configured for UDMA/33 [Thu Nov 7 12:58:41 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:47 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:53 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:53 2024] ata1.00: disable device [Thu Nov 7 12:58:58 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:59 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [Thu Nov 7 12:58:59 2024] ata1: limiting SATA link speed to 1.5 Gbps [Thu Nov 7 12:59:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:59:00 2024] ata1: limiting SATA link speed to 1.5 Gbps [Thu Nov 7 12:59:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:59:01 2024] ata1: limiting SATA link speed to 1.5 Gbps [Thu Nov 7 12:59:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [Thu Nov 7 12:59:01 2024] ata1: EH pending after 5 tries, giving up [Thu Nov 7 12:59:01 2024] ata1.00: detaching (SCSI 0:0:0:0) [Thu Nov 7 12:59:01 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache [Thu Nov 7 12:59:01 2024] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [Thu Nov 7 12:59:19 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (start) [Thu Nov 7 12:59:20 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 12:59:20 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (done) [Thu Nov 7 12:59:22 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh status (start) [Thu Nov 7 12:59:23 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh status (done) [Thu Nov 7 12:59:23 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh (start) [Thu Nov 7 12:59:24 2024] VFIO - User Level meta-driver version: 0.3 [Thu Nov 7 12:59:24 2024] ioatdma 0000:00:04.7: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:00:04.6: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:00:04.5: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:00:04.4: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:00:04.3: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:00:04.2: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:00:04.1: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:00:04.0: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:80:04.7: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:80:04.6: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:80:04.5: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:80:04.4: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:80:04.3: Removing dma and dca services [Thu Nov 7 12:59:24 2024] ioatdma 0000:80:04.2: Removing dma and dca services [Thu Nov 7 12:59:25 2024] ioatdma 0000:80:04.1: Removing dma and dca services [Thu Nov 7 12:59:25 2024] ioatdma 0000:80:04.0: Removing dma and dca services [Thu Nov 7 12:59:25 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 12:59:26 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh (done) [Thu Nov 7 12:59:27 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (start) [Thu Nov 7 12:59:28 2024] nvme nvme0: pci function 0000:84:00.0 [Thu Nov 7 12:59:28 2024] nvme nvme0: 32/0/0 default/read/poll queues [Thu Nov 7 12:59:28 2024] nvme nvme0: Ignoring bogus Namespace Identifiers [Thu Nov 7 12:59:29 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 12:59:29 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (done) [Thu Nov 7 12:59:29 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh (start) [Thu Nov 7 12:59:30 2024] ioatdma 0000:00:04.7: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:00:04.6: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:00:04.5: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:00:04.4: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:00:04.3: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:00:04.2: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:00:04.1: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:00:04.0: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:80:04.7: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:80:04.6: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:80:04.5: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:80:04.4: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:80:04.3: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:80:04.2: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:80:04.1: Removing dma and dca services [Thu Nov 7 12:59:30 2024] ioatdma 0000:80:04.0: Removing dma and dca services [Thu Nov 7 12:59:31 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 12:59:31 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh (done) [Thu Nov 7 13:01:45 2024] nbd0: detected capacity change from 0 to 131072 [Thu Nov 7 13:01:45 2024] block nbd0: Other side returned error (5) [Thu Nov 7 13:01:45 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [Thu Nov 7 13:01:45 2024] Buffer I/O error on dev nbd0, logical block 0, async page read [Thu Nov 7 13:01:46 2024] nbd1: detected capacity change from 0 to 131072 [Thu Nov 7 13:01:46 2024] block nbd0: NBD_DISCONNECT [Thu Nov 7 13:01:46 2024] block nbd0: Disconnected due to user request. [Thu Nov 7 13:01:47 2024] block nbd1: NBD_DISCONNECT [Thu Nov 7 13:01:47 2024] block nbd1: Disconnected due to user request. [Thu Nov 7 13:01:52 2024] nbd0: detected capacity change from 0 to 131072 [Thu Nov 7 13:01:52 2024] block nbd0: Other side returned error (5) [Thu Nov 7 13:01:52 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [Thu Nov 7 13:01:52 2024] Buffer I/O error on dev nbd0, logical block 0, async page read [Thu Nov 7 13:01:52 2024] nbd1: detected capacity change from 0 to 131072 [Thu Nov 7 13:01:53 2024] block nbd1: Other side returned error (5) [Thu Nov 7 13:01:53 2024] I/O error, dev nbd1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [Thu Nov 7 13:01:53 2024] Buffer I/O error on dev nbd1, logical block 0, async page read [Thu Nov 7 13:01:53 2024] block nbd0: NBD_DISCONNECT [Thu Nov 7 13:01:53 2024] block nbd0: Disconnected due to user request. [Thu Nov 7 13:01:54 2024] block nbd1: NBD_DISCONNECT [Thu Nov 7 13:01:54 2024] block nbd1: Disconnected due to user request. [Thu Nov 7 13:01:59 2024] nbd0: detected capacity change from 0 to 131072 [Thu Nov 7 13:01:59 2024] block nbd0: Other side returned error (5) [Thu Nov 7 13:01:59 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [Thu Nov 7 13:01:59 2024] Buffer I/O error on dev nbd0, logical block 0, async page read [Thu Nov 7 13:02:00 2024] nbd1: detected capacity change from 0 to 131072 [Thu Nov 7 13:02:00 2024] block nbd1: Other side returned error (5) [Thu Nov 7 13:02:00 2024] I/O error, dev nbd1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [Thu Nov 7 13:02:00 2024] Buffer I/O error on dev nbd1, logical block 0, async page read [Thu Nov 7 13:02:01 2024] block nbd0: NBD_DISCONNECT [Thu Nov 7 13:02:01 2024] block nbd0: Disconnected due to user request. [Thu Nov 7 13:02:01 2024] block nbd1: NBD_DISCONNECT [Thu Nov 7 13:02:01 2024] block nbd1: Disconnected due to user request. [Thu Nov 7 13:03:38 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh (start) [Thu Nov 7 13:03:39 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 13:03:39 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh (done) [Thu Nov 7 13:04:33 2024] nbd0: detected capacity change from 0 to 40960000 [Thu Nov 7 13:05:09 2024] GPT:Primary header thinks Alt. header is not at the end of the disk. [Thu Nov 7 13:05:09 2024] GPT:10485759 != 40959999 [Thu Nov 7 13:05:09 2024] GPT:Alternate GPT header not at the end of the disk. [Thu Nov 7 13:05:09 2024] GPT:10485759 != 40959999 [Thu Nov 7 13:05:09 2024] GPT: Use GNU Parted to correct GPT errors. [Thu Nov 7 13:05:09 2024] nbd0: p1 p2 p3 p4 p5 [Thu Nov 7 13:05:10 2024] block nbd0: NBD_DISCONNECT [Thu Nov 7 13:05:10 2024] block nbd0: Disconnected due to user request. [Thu Nov 7 13:05:12 2024] kvm_intel: L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [Thu Nov 7 13:10:12 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh (start) [Thu Nov 7 13:10:13 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 13:10:13 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh (done) [Thu Nov 7 13:10:15 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh (start) [Thu Nov 7 13:10:16 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 13:10:16 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh (done) [Thu Nov 7 13:10:16 2024] Key type psk registered [Thu Nov 7 13:11:06 2024] Key type psk unregistered [Thu Nov 7 13:11:08 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh reset (start) [Thu Nov 7 13:11:09 2024] nvme nvme0: pci function 0000:84:00.0 [Thu Nov 7 13:11:09 2024] nvme nvme0: 32/0/0 default/read/poll queues [Thu Nov 7 13:11:09 2024] nvme nvme0: Ignoring bogus Namespace Identifiers [Thu Nov 7 13:11:11 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 13:11:11 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh reset (done) [Thu Nov 7 13:11:14 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (start) [Thu Nov 7 13:11:16 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d] [Thu Nov 7 13:11:16 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (done) [Thu Nov 7 13:11:16 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh cleanup (start) [Thu Nov 7 13:11:17 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh cleanup (done)